Thursday, June 19, 2014

Artistic iPhone Photography Tutorial.


Over several months I've been asked about my workflow and about what apps I use to create some of my iPhone artistry.  So, I thought I would attempt to post a blog about it.  The image above was originally taken with my iPhone while on a recent visit to Venice.  Below is the unedited photo taken with my iPhone.

If you look closely, you will see one of our workshop instructors, Marilyn Sholin, and her husband, Mickey, standing across the way, taking a picture herself.  As you can see, it's just an ordinary photograph taken with an iPhone.

The first thing that I did, and almost always do, is take the image into Snapseed, crop and straighten if necessary and then run HDRscape on the image.


As you can see I reduced the filter strength a bit, but running this filter really brings out the detail.
Under this same filter, I also increased the smoothing slider just a bit.

I then applied this filter by hitting the check mark button on the lower right.  My next step with to use the tune filter in Snapseed.


Using the Tune filter, I typically will increase the Ambiance by a little, the saturation-a little, and the warmth.  See above.  I apply this filter the same as before by hitting the check mark to apply.  Lastly, in Snapseed I will use the Details filter to increase the sharpening and structure.  I particularly like the structure part of this filter.  It just brings so much clarity to the image.  See below.


My next step is to make an outline of the image.  There are two filters that can be used for this.  ToonPaint and PencilFX.  I chose the ToonPaint app for this project.  And when doing so, I save immediately after making the outline.  You have the option in the app to fill it in with color, but for this tutorial I just need the outline.


In addition, I typically decrease the edges slider.  I then hit the Share button and save to my camera roll.

My next step is to take the earlier image (before the outline) and bring it into iColorama.  The first step is to run it through the Effects/Flow filter.


I'm usually fairly happy with the default settings in Flow, except that I reduce the Opacity a bit.  I then hit the apply button in the upper right corner.

The next step is to use the Style/Simplify filter.


I will usually the default of this filter as well, except that I also lower the opacity a bit.

I'm pretty satisfied with this so far, although, sometimes I will also use the Adjust/EQ filter to brighten it up a bit.  However, I didn't think it needed it this time.  Apply and then save this image to your camera roll.

The next step is to take this saved image into Glaze app.  You will need to experiment with the different filters in this app to see what works the best, and you can even save and mix the filters if you want.  In this particular, I was pretty satisfied with the last of the second groupings.  See below.


For the most part, I like this a lot.  I do think that the sky is a bit harsh, so I will take this image into Repix to soften that sky.


The two filters I used to soften the sky was the Daubs filter and then the Charcoal filter. This I saved to my camera roll.

The next step is to take this image and the outline image into Superimpose App.

First load your background image, which is the most recent saved image right out of Repix.  Secondly, you need to load the Foreground image which is the Outlined image. Hit Choose, then Transform and then the ScaleFit button in the upper right hand corner noted by a cross symbol.  See below.


From this point you can choose your blending mode.  I happen to think that the Multiply blending mode looks best, however I do reduce the transparency a bit.


I like the way this looks, so I flatten the image by using the upper left corner button, and then I save the image to my camera roll.

The final process is to use the PhotoToaster app.  PhotoToaster is probably my favorite app and I generally finish all my images with this app and/or Distressed FX.


I will usually put this app through its paces, because what looks good on one image may not always look good on another.  The preset that I liked for this image is the Amplify filter under the Deluxe presets. I don't particularly like the border, so I then bring up the borders filters by clicking on the v at the lower left hand corner and choose No Border.


I very much like the way this looks, so I think I'm finished with this, although I will on many occasions, add a texture and then take my images into Distressed FX to add a little texture.

So here is the finished piece again.


If you have found this tutorial helpful-let me know, as I will consider doing others.

Happy Apping!

Jane

19 comments:

  1. This is a wonderful tutorial, Jane; thanks ever so much for posting it.

    ReplyDelete
  2. Jane, I loved this tutorial. Thank you for sharing it! Jennifer

    ReplyDelete
    Replies
    1. Your welcome, Jennifer! Glad youmlikedmit!

      Delete
  3. Hello! I'm so happy to see a post from you. I started following you on RSS several weeks ago, greatly admiring your work. As far as phones go, I still have the dumb kind, so I still take my pictures with a camera and edit on PSE, but I hope to upgrade before too long and will certainly come back to this when I'm ready.

    ReplyDelete
    Replies
    1. So glad you liked it. Thanks for the follow!

      Delete
  4. What a great tutorial Jane! I have been experimenting with it all night! Now I just need a trip to Venice to really get some good material =)

    ReplyDelete
    Replies
    1. Thanks Geri! Appreciate the exposure!

      Delete
  5. This is a wonderful tutorial! So easy to understand! Thank you!

    ReplyDelete
  6. I'm here via Geri's blog - thanks so much for the wonderful tutorial! I just sat down and gave it a try with one of my IG photos and couldn't be happier. What a beautiful result!

    ReplyDelete
    Replies
    1. Sherri, thank you! Glad you enjoyed!

      Delete
  7. Great tutorial. I also use and love Photo Toaster and don't notice enough people talking about it, so glad to see it works so well with painterly work. I found you through Geri.

    ReplyDelete
    Replies
    1. Thank you Karin! I agree, you hardly ever hear about it!

      Delete
  8. Just discovered your blog and I really love this tutorial! Your clear instructions will be so helpful. Can't wait to give it a try!

    ReplyDelete
  9. Thank you so much for the step by step. Really well done. I learned so much. Yes to more!

    ReplyDelete
  10. it's great to pick up some tips from you. Have you ever used the outlines from iColorama? They are in the Styles>Edges. I found another area that did an edge too but can't now for the life of me. Sometimes I go to Levels after that to pul more white.

    ReplyDelete
    Replies
    1. Thanks Roxi! I've used edges in iColorama as an option, but for this tut I preferred the ToonPaint option.

      Delete